Street Engine Packages

Street Package #1

Here is our most economical big bang for the buck package. 355 small block chevy.

  • Street 355 pump gas 400 hp
  • GM block
  • GM crank
  • Forged steel rods
  • Speed Pro pistons + rings
  • Fel pro gaskets
  • Speed pro cam + solid tappets
  • World products heads
  • Weiand intake manifold
  • Melling oiling system
  • Manley bolt kit
  • Comp cams roller rockers
  • Holley 750 carb
  • HEI distributor
  • Precision machined and dyno tested $4550
  • Hydraulic cam version 360 hp 415 ft/lbs tq $4350




Street Package #2

All packages can be taylored to meet the customers needs. i.e. add or remove components or upgrade/downgrade components to fit the need/budget.

  • Street 383 pump gas 500-585 hp
  • GM 4 bolt seasond core block
  • PBM cast steel or Callies compstar 4340 crank
  • PBM I beam or Manley H beam rods
  • Mahle or SRP pro pistons + rings
  • Fel pro gaskets
  • Custom ground comp cam’s cam
  • Hyd flat/roller or solid roller
  • Brodix or AFR CNC heads
  • Weiand or Edelbrock Intake
  • Moroso oiling system
  • Manley bolt kit
  • Comp cams rockers
  • Holley double pumper or ultra HP carb
  • HEI or MSD distributor
  • Precision machined and dyno tested $7150 – $8550




580 hp roller cam version shown here


Street Package #3

Street 632 pump gas. 900 – 980hp

  • Dart / World block
  • Callies Dragon slayer r Magnum crank
  • Manley H beam rods- W- ARP – 2000 bolts
  • JE or Diamond pistons + Total seal rings
  • Custom comp solid o hydraulic roller
  • Comp Hydraulic or Crower severe duty tappets
  • Jesel sportsman belt +1.8 ratio rockers
  • Fel pro HP gaskets
  • Moroso high volume oiling system
  • Manley bolt kit
  • Brodix BB-3-X-tra 380 cc CNC heads w Titanium retainers
  • Edelbrock Super victor 2 – 632
  • Manley 3/8 X .080 pushrods
  • Holley HP dominator carb
  • MSD distributor
  • Precision machined and dyno tuned $15,600 – #16,500
  • Add Moroso 4 vane vacuum kit for $950
  • Add 2 X 4 Intake and custom tuned carb,s for $700
  • Add Brodix Aluminum block with roller cam brgs and .904 tappets for $3600




This is the engine in my willys. Best run to date is an 8.41 @ 159 mph with the car weighing 2900lbs and running on pump gas. Shown with 2 x 4 intake and aluminum block option.


Street Package #4

Street 421ci 595 – 625 hp pump gas

  • Dart SHP or GM block
  • Callies compstar crank
  • Manley H beam rods
  • SRP pro pistons + rings
  • Custom comp Solid or hydraulic roller cam
  • PBM or ATI SFI approved damper
  • Moroso oiling system
  • Manley bolt kit
  • Fel pro HP gaskets
  • Brodix Track 1 or Dragon slayer CNC ported heads
  • Brodix or Edelbrock intake
  • Comp ultra gold rockers or Jesel sportsman
  • Manley pushrods
  • Holley double pumper or ultra HP carb
  • HEI or MSD distributor
  • Precision machined and dyno tuned $9300 –$10,800





Street Package #5

Street 468–496 pump gas 655—720 hp

  • GM 4 ¼ bore block
  • PBM cast steel or GM 4” stroke crank
  • PBM 4340 I beam or GM forged steel rods
  • SRP or Mahle pistons + rings
  • Fel pro gaskets
  • Custom comp roller cam + Crower tappets
  • CNC ported Brodix or AFR heads
  • Edelbrock Victor Jr or Wiand dual plane intake manifold
  • Moroso 7 qt oiling system
  • Manley bolt kit
  • Comp cams roller rockers
  • Holley double pumper850 or ultra HP 950 carb
  • HEI orMSD distributor + wires
  • Precision machined and dyno tested $8200 — $9800
  • Hydraulic roller cam version avalabile @ 620hp
  • Add a 4340 crank fior $450
  • You can supply a core short block and save $600




720 HP 496ci version shown with AFR heads


Street Package #6

This pump gas beast makes 630 hp @ 6500 and 580 ft lbs @ 5100 and is designed to be very reliable. High compression version avalible with 670 hp and 600 ft lbs.

  • The street ANIMAL 2 X 4
  • Street 421ci 630 hp pump gas 600 ft lbs torque
  • Dart SHP block
  • Callies compstar crank
  • Manley H beam rods
  • JE pro pistons + rings
  • Custom comp Roller cam + Crower SD tappets
  • Cloyes severe duty timing set
  • SFI approved damper
  • Moroso oiling system
  • Manley bolt kit
  • Fel pro HP gaskets
  • Brodix Dragon slayer CNC ported heads
  • Comp ultra gold rockers+ Stud girdle
  • Manley pushrods
  • Ported tunnel ram 2 X 4 intake
  • Holley custom calibrated carb’s
  • MSD distributor
  • Precision machined and dyno tuned $11,900
  • Add Brodix aluminum block $2900
  • Add moroso 4-vanevacume kit $950






Street Package #7

The Street 555 is a pump gas motor making from 760 to 858 HP.

  • Dart / World block
  • Callies compstar crank
  • Manley H beam rods
  • SRP pistons + rings
  • Custom comp roller
  • Crower severe duty tappets
  • Jesel belt + rockers
  • Fel pro HP gaskets
  • Moroso oiling system
  • Manley bolt kit
  • Brodix RR BB-2 plus CNC heads + Intake
  • Manley pushrods
  • Holley dominator carb
  • MSD distributor
  • Precision machined and dyno tuned @780 HP $13,700
  • 850 HP “Mad Man” version with BB3 xtra-O heads, Sonnys intake, Custom APD carb and Black widow spacer for $15,000
  • Econo version with Scat crank, rods , Erson cam and lifters , economy cylinder heads and billet timing
    chain that makes 760 HP for only $12,350
  • Add Moroso 4 vane vacuum kit for $950
  • Add 2 X 4 Intake and custom tuned carbs for $800
  • Add Brodix Aluminum block with roller cam brgs and .904 tappets for $3600


Fresh off the dyno the “Mad Man” 555 made a whopping 858 hp @ 6300 rpm and 759 ft lbs at 5300 rpm on pump gas


Blown Big Blocks

We also build roots blown engines for street and drag applications. This mild 509 big block Chevy pictured to the right makes 1000+ hp in race gas form.


LS1 Engines

We also do LS1 engines of all sizes and for all applications. Shown to the right is Chris Fishers 436 ci nitrous street engine



One comment

Leave a Reply